Value Right Associates

2 BHK Plan I

3 BHK -1578 SQ.FT.

  • 3 Bedroom
  • 1 Drawing/Dinning Area
  • 1 Kitchen
  • 2 Toilets
  • 2 Balconies
Contact Us IVR No. +91-9069142898

3 BHK -1539 SQ.FT.

  • 3 Bedroom
  • 1 Drawing/Dinning Area
  • 1 Kitchen
  • 2 Toilets
  • 2 Balconies
Contact Us IVR No. +91-9069142898

3 BHK -1500 SQ.FT.

  • 3 Bedroom
  • 1 Drawing/Dinning Area
  • 1 Kitchen
  • 2 Toilets
  • 2 Balconies
Contact Us IVR No. +91-9069142898

SECTION-X - LIST OF APPROVED MAKES OF MATERIALS FOR VR HEIGHTS IN ALIGARH CIVIL WORK

1 R.C.C -----M-30 FOR COLUMN AND M-25 FOR SLAB M-15 FOR BASE
2 BRICK – IST CLASS –U.P. BRICK
3 STEEL – RATHI . /SAIL/TIRUPATI /500 –D GRADE
4 CEMENT – A.C.C. /J.K./BINANI /SHREE ULTRA
5 WATER –UNDER GROUND WATER . FREE FROM IMPURITIES
6 FLOORING – STONE /TILE AND WOOD EN TILE (FINISHING TOP @ R 60- PER SQFT)
7 TILE – FOR WALL - ORIENT /KAJARIA/ OR EQIVALENT ( TILE COST –R S -35 PER SQFT)
8 STEPS – FINISHED WITH GRANITE (RAJASTHAN )
9 KITCHEN COUNTER – GRANITE (SOUTH INDIAN ) (RATE @RS -150-0PERSQFT)
10 RAILING IN STAIR CASE –SS PIPE (STAINLESS STEEL -304)
11 BALCONY RAILING – CAST ALUMINIUM MIXED WITH IRON
12 ELECTRICAL WORK
13 CONDUIT – PVC ( SETIA. ,
14 WIRE – PLAZA , HAVELS , FINOLEX , FOR AC WITH 4.5SQMM
15 SWITCHES – ROMA, ANCHOR ,
16 MCB- HAVELS
17 PLUMBING WORK
18 WATER SUPPLY - CPVC , PIPES AND FITTING ISI MAKE
19 SANITARY PIPE – , PRINCE OR EQUIVALENT ISI APPROVED – 6KG /CM2 PRESSURE
20 C.P. FITTINGS – ZIM , PARKO, taps RS-350 to RS -400 (KITCHEN MIXER – COST (RS -1500) WASH BASIN MIXTURE (Rs 2000)
21 Bathing area mixture –(RS 2500)
22 SANITARY FITTINGS – CERA OR HINDWARE (OR AS PER DEMAND WITH COST DIFFERENCE )
23 W.C WITH CISTERN –RS 4500-00
24 WASH BASIN WITH TRAP AND JALI – RS 1500
25 KITCHEN SINK –RS - 2500 (DOUBLE BOWL)
26 (OR TOTAL MODULAR KITCHEN @ 1500 PER SQFT)
27 ENTRY DOOR – 40MM TH. WATER PROOF FLUSH DOOR PHENOL BONDED
28 DECORATED WITH MOULDING AND LAMINATED FITTED IN MARANDI WOOD
29 CHAUKHAT 150MM X 62.5MM CHAUKHAT
30 OTHER DOOR LAMINATED FLUSH DOOR SHUTTER 35MM TH
31 OUTER WINDOWS – UPVC / GLAZED AND SLIDING / WIDOWS WITH WIREMESH FRAME FOR OPENABLE AREA
32 PROTECTED WITH M.S GRILL
33 LIFT – JOHNSON , MAKE 6 PASSANGER LIFT WITH ONE EMERGENCY LIFT EXTRA WITH ARD SPEED -0.75 M/SEC
34 POWER BACKUP -2.5 KVA FOR 2BHK AND 4.0KVA FOR 3BHK ( ADDITIONAL ON PAYMENT )
35 PARKING SPACE – ONE RESERVED ( STILT , BASEMENT AS AVAILABLE )ADDITIONAL ON PAYMENT
36 Door handel and tower bolt –SS SHEET
1 Ply Century, Merino, Green, Archidply.
2 Dash fasteners HILTI, DASH, BOSCH
3 Stone As per approved sample.
4 Laminate Century, Merino, Greenlam (RS 20p er sqft).
5 Surface sealer for stone Aquamix, wacker, Litecrete .
6 Paint I.C.I., Berger Paints, Dulux.
7 Mirror Modi Guard
8 Glass Modi, Saint Gobain.
9 Veneer Donear, Century, Sun, Archidply.
10 Floor Springs Dorma , Dline.
11 Drawer channels Haffle (Full Extension/ Telescopic).
12 Locks in cabinets, furnitures Dorset, Godrej, BOLT.
13 Fire retardant paint Navair (Viper) or approved equipment.
14 Adhesive for wood Fevicol or approved equipment
15 Magnetic White board Alko Super, White Mark, White Star.
16 ASAM TEAK 1st Quality.
17 Hollock Wood 1st Quality.
18 Mineral Wool Insulation U.P. Twiga, Rock Wool.
19 Gypsum board false ceiling and Partition with all accessories India Gypsum
20 Ceramic Tiles Kajaria, Somany.
21 Vitrified Tile Naveen, Restile, Bell.
22 Flush Door Shutters Century, Green Ply, Archidply.
22 Laminate Century, Merino, Greenlam (RS 20p er sqft).

Note:

1. For approval.
2. Subject to changes as per client’s demands.
3. For any other item required to be incorporated in works, sample shall be got approved from the Architect/ Project Manager.

LIST OF CODES

The materials and workmanship shall be in accordance with the requirement of the appropriate IS code wherever applicable together with any building regulations or bye-laws governing the works.
The following list is included for guidance only and the omission from the list does not relieve the contractor from compliance therewith:

1991 Ferrous metals
1 IS 1200 Mode of measurement.
2 IS 269 Ordinary Portland cement.
3 IS 2386 Method of test for aggregate for concrete.
4 IS 516 Method of test for strength of concrete.
5 IS 383 Coarse and fine aggregate from natural sources for concrete.
6 IS 456 Code of practice for plain and reinforced concrete.
7 IS 1786 Cold twisted steel bars for concrete reinforcement.
8 IS 1130 Marble (blocks, slabs and tiles).
9 IS 287 Recommendation for maximum permissible moisture contents of Timber used for different purposes.
10 IS1141 Code of practice for seasoning of timber.
11 IS 2202 Wooden flush door shutter (Solid core type).
12 IS 104 Specification for ready mixed painted, brushing, zinc chrome, priming.
13 IS 137 Ready mixed paint, brushing, matt or egg-shell flat, finishing, interior to Indian standard color as required.
14 IS 427 Distemper, dry color as required.
15 IS 428 Distemper, oil emulsion, color required.
16 IS 5411 Plastic emulsion paint as required.
17 IS 733 Aluminum alloys
18 IS 1948 Aluminum sections
19 IS 2720 Density test of aggregate.
20 IS 204 Specification for tower bolts
1992 Non-ferrous metals
1 IS 205 : 1992 Specification for non-ferrous metal butt hinges .
2 IS 281 : 1991 Specification for mild steel sliding door bolts for use with padlock.
3 IS 362 : 1991 Specification for parliament hinges .
4 IS 452 : 1973 Specification for door springs, rattail type.
5 383 : 1970 Specification for coarse and fine aggregates from natural sources for concrete.
6 1542 : 1992 Specification for sand for plaster .
7 2116 : 1980 Specification for sand for masonry mortars.